●
DRILLING WOOD OR PLASTIC
CLAMP OR ANCHORE THE WORKPIECE TO STABILISE IT.
WHEN DRILLING THIN MATERIAL, IT IS RECOMMENDED TO USE A
WOOD MADE “BACK-UP” BLOCK TO PREVENT WORKPIECE FROM
SPLINTERING.
●
DRILLING METALS
TO EASE THE DRILLING, MAKE A CENTRE PUNCH IN THE WORKPIECE.
IF THE HOLE TO BE DRILLED IS LARGE, MAKE A SMALLER HOLE FIRST,
THEN ENLARGE IT TO THE REQUIRED SIZE. SOMETIMES, YOU MAY
NEED CUTTING OIL TO LUBRICATE THE TIP OF THE BIT TO FACILITATE
THE DRILLING.
●
DRILLING MASONARY
USE CARBIDE TIP BITS FOR ALL MASONARY DRILLING. THE PRESSURE
APPLIED ON YOUR IMPACT DRILL DEPENDS ON THE HARDNESS OF
THE MATERIAL BEING DRILLED.
MAIN TECHNICAL DATA
MODEL
JID900
RATED INPUT POWER
900 W
RATED INPUT CURRENT
4.2 A
VOLTAGE / FREQUENCY
220 V50 Hz
NO-LOAD SPEED
0 – 3.000 RPM
MAX. CHUCK DIAMETER
13 MM
MAX. DRILLING CAPACITY
- CONCRETE
15 MM
- WOOD
25 MM
- STEEL
13 MM
NOISE AND VIBRATION
～
- SOUND PRESSURE LEVEL
55.7 dB (A)
- SOUND POWER LEVEL
66.7 dB (A)
- VIBRATION LEVEL
M/S
2
WEIGHT
2.7 KG
18/28
