15
16
1. Loosen the shoulder belts by
activating the belt adjuster on the
center and simultaneously pulling
both shoulder belts upwards.
12
2. Open the belt buckle by pressing
firmly on the red button.
10
-1
.
place the child in the seat and put
the shoulder belts over the child's
shoulder.
26
3. Bring both belt tongues together
and lock them into place in the
belt buckle with an audible
"CLICK".
11
4. Pull down the adjustment
webbing and adjust it to the
proper length so that your child is
snugly secured.
27
!
Make sure the space between
the child and the shoulder
harness is about the thickness
of one hand.
for Head Support and
Shoulder Harnesses
see images
28
1. Please adjust the head support
and shoulder harnesses to proper
height according to the child's
height.
2. Squeeze the head support
adjustment lever
28
-1
, meanwhile
pull up or push down the head
support until it snaps into one of
the 6 positions. The head support
positions are shown as
28
26
27
Height Adjustment
28
1
1
!
After removing the foam of small seat pad, please store it somewhere that
the child can not access it.
!
Please wash the soft goods with cold water under 30°C.
!
Do not iron the soft goods.
!
Do not bleach or dry clean the soft goods.
!
Do not use undiluted neutral detergent, gasoline or other organic solvent to
wash the child restraint. It may cause damage to the child restraint.
!
Do not twist the soft goods to dry with great force. It may leave the soft
goods with wrinkles.
!
Please hang dry the soft goods in the shade.
!
Please remove the child restraint from the vehicle seat if not in use for a
long period of time. Put the child restraint in the shade and somewhere your
child can not access it.
Cautions
Soft Goods Assembly
see images
29
-
34
1. Place the seat pad on the body and
thread the buckle through the seat
pad slot.
29
2. Wrap the buckle with the elastic on
the inside of the crotch strap.
30
3. Thread the adjustment webbing and
harnesses on both sides through the
seat pad respectively.
30
-1
29
30
11
