13
14
Use either shoulder harness anchor in the slots that are closest to child's
shoulder height.
20
Use slide adjuster to change the harness length.
21
- 1
Press the button
21
- 2
, while pulling the waist harness to proper length
21
- 3
Adjust Calf Support
The calf support has 2 positions.
To adjust the calf support, press the adjustment buttons underneath the calf
support
22
- 1
and rotate the calf support downward or upward.
22
- 2
Use Front Swivel Lock
Pull up the front swivel locks to maintain the moving direction.
23
Tip
It is recommended to use swivel locks on uneven surfaces.
Use Brake
To lock wheels, step backwards on either of the brake levers as
24
, Step
forwards on the brake lever to release wheel.
Tip
The brake must be engaged when placing and removing children.
Tip
Always apply brake when stroller is in stopped position.
Tip
To ensure brake is fully engaged, gently rock the stroller backwards
and forwards before releasing the handle.
Tip
Clean brake system regularly to ensure fully functional. See care and
maintenance section.
Use Hood
To open the hood, pull hood towards front.
25
To fold the hood, pull hood towards back.
26
Use Tether Strap
Use the tether strap to prevent the stroller inadvertently rolling away.
If you cannot easily control the stroller move the tether to a different
position.
1. To disassemble tether strap. Select a position high up on the handle and
wrap the tether strap around the handle and thread the larger loop
through the smaller loop, pull tight.
27
2. Check that when your hand is through the loop, the position selected
allows you to easily control the stroller.
Fold Stroller
Push secondary lock
28
- 1
and squeeze one-hand fold handle
28
- 2
.
Push the stroller forward to fold. Lock the stroller by tucking storage latch
onto the storage mount
29
- 1
. The stroller is folded and locked
completely.
29
Use Carry Strap
Securely grab the carry strap for easy transportation.
30
Use Accessory
31
Rain Cover
Accessories may be sold separately or may not be available depending
on region.
Use Rain Cover
To assemble the rain cover, place it over the stroller, and then attach the
10 pairs of hook and loop fasteners on the rain cover.
32
!
Before using the rain cover, please make sure the backrest has been
adjusted to the lowest position and the infant car seat has been
fastened.
!
After the rain cover is assembled, please reassemble the parent tray on
the handle.
!
When using the rain cover, please always check its ventilation.
!
When not in use, please check that the rain cover has been cleaned and
dried before folding.
!
If the rain cover is on the stroller, always remove rain cover to prevent
ripping and tearing.
!
Do not place your child into the stroller assembled with rain cover
during hot weather.
!
When using your stroller at the beach, completely clean you stroller after
use to remove sand and salt from mechanisms and wheel assemblies.
