11
12
Stroller Assembly
Please read all the instructions in this manual before assembling and using
this product.
Open Stroller
If the stroller is locked as
2
- 1
, please separate storage latch
2
- 2
from
storage mount
2
- 3
, and then lift the handle to open the stroller. A click
sound means the stroller is open completely.
2
!
Check that the stroller is completely open before continuing.
Assemble Front Wheels
Assemble front wheels to front legs. Check that wheels are securely attached
by pulling on wheel assemblies.
3
The front wheels can be disassembled by pulling the release buttons
backwards.
4
Assemble Rear Wheels
Assemble the rear wheels by following these steps.
1. Remove and discard the two end caps on the rear axle before
assembling the rear wheels.
5
- 1
2. Assemble the rear axle assembly to rear legs
5
. Check that the rear
axle assembly is securely attached by pulling on the rear axle assembly.
3. Place the rear wheel and washer on one side of the rear axle.
6
4. To secure wheel and washer to axle, push the straight side of pin
through the hole on the axle
7
.
The assembled pin is shown as
8
.
!
The curve side on the pin must curve around the outside of the axle.
!
Make sure the washer is between the pin and the wheel.
5. Line up the tabs on the cap with the holes on the wheel, snap the cap
onto the wheel to cover the washer and pin.
9
The completely assembled rear wheels are shown as
10
.
Assemble Parent Tray
To assemble the parent tray, attach the parent tray to the parent tray
mounts on both sides of the handle.
11
To remove parent tray in reverse steps.
!
Do not place any item that may do harm to the baby and stroller in the
parent tray.
!
The maximum recommended weight of the parent tray is 1.36kg/3lbs.
Assemble Rotating Child's Tray
Align the rotating child's tray end with matching component, and then push
down to assemble.
12
The completely assembled stroller is shown as
13
.
Stroller Operation
Adjust Recline
Recline Backrest
There are 4 angles for the backrest.
To recline the backrest, squeeze the recline handle on the back of the seat
14
, pull down on the backrest.
15
To raise the backrest, push up.
!
Make sure the recline is set properly for use.
Use Rotating Child's Tray
The rotating child's tray can be pulled up on both left and right sides.
To open the rotating child's tray, press rotating child's tray release button
16
- 1
, and then pull up the rotating child's tray.
16
- 2
Tip
Rotating child's tray can be open for easily placing and removing
child.
Use Buckle
Release Buckle
Press the center button to release the buckle.
17
Lock Buckle
Match the waist belt buckle with the shoulder buckle
18
- 1
, and click into
the center buckle.
18
- 2
A click sound means the buckle is locked
completely.
18
- 3
!
To avoid serious injury from falling or sliding out, always secure your
child with harness.
!
Make sure your child is snugly secured. The space between the child
and the shoulder harness is about the thickness of one hand.
!
Do not cross the shoulder belts. This will cause pressure on child’s neck.
Use Shoulder & Waist Harnesses
!
In order to protect your child from falling out, after your child is placed
into the seat, check whether the shoulder and waist harnesses are at
proper height and length.
19
- 1
Shoulder harness anchor A
19
- 2
Shoulder harness anchor B
19
- 3
Slide adjuster
For larger child, use shoulder harness anchor A and the highest shoulder
slots. For smaller child, use shoulder harness anchor B and the lowest
shoulder slots.
