11
12
!
After attaching the ISOFIX, pull the
load leg downward to floor. When
the load leg indicator shows green,
the load leg is installed correctly.
!
Squeeze the load leg releasing
button, then adjust the load leg
length.
7
!
The load leg has multiple positions.
When the load leg indicator shows
red this means the load leg is in the
wrong position.
8
!
Make sure the load leg is in full
contact with the vehicle floor pan.
Red means it is installed incorrectly.
8
!
Check to make sure the base is
securely installed by pulling on
both ISOFIX connectors.
!
The ISOFIX connectors must be
attached and locked onto the
ISOFIX anchor points.
9
-1
!
The load leg must be installed
correctly with green indicator.
9
-2
7
8
9
1
2
11
1
2
Removing the base
To remove from the vehicle press the
ISOFIX adjuster button
10
-1
and pull
the base back from the seat.
10
-2
Then press and release the
connectors from the vehicle’s
ISOFIX.
11
To prevent damage during transit,
press the ISOFIX adjuster button
12
-1
and fold the connector
completely.
12
-2
12
1
2
10
1
2
