Joie i-Quest signature, Instruction Manual

Page: 12 / 67

21 22
3. Fix the buckles on the both sides of
the seat shown as 32 which located
on the both sides of seat to make
placing the child in forward facing
mode more convenient.
4. When installing the enhanced child
restraint in the forward facing mode,
do not use the infant insert.
5. Place the child into the enhanced
child restraint and pass both arms
through the harnesses. Engage the
buckle.
!
After the child is seated, recheck
whether the shoulder harnesses are
at the proper height.
6. Pull down the adjustment webbing
and adjust it to the proper length to
make sure your child is properly
secured.
33
!
Always keep child secured in
harness and properly tightened by
removing any slack.
Remove the body portion
of the infant insert when
the infant’s shoulders no
longer fit comfortably.
!
To release the seat, lift the seat by
the harness
29
-2 upwards while
pressing the attachment releasing
handle.
29
-1
Securing Child
1. Press the webbing adjustment
button, while pulling out the
shoulder harnesses to the desired
(Pull from below the fixed shoulder
pads to lengthen) length.
30
2. Unlock the buckle of the harnesses
by pressing the red button. 31
33
32
31
29
2
30
1