Joie finiti, Instruction Manual

Page: 16 / 189

29
Detach & Assemble Soft Goods
see images
69
-
84
Remove armbar shown as
26
To re-assemble seat soft goods, follow the steps above in
reverse
84
-
69
Cleaning and Maintenance
see images
85
! To clean stroller frame, use only household soap and warm
water. No bleach or detergent. Please refer to the care label
for instructions on cleaning the fabric parts of the stroller.
! Removable soft goods can be washed by machine. No
bleach. Do not twist the seat cover and inner padding to dry
with great force. It may leave the seat cover and inner
padding with wrinkles.
! From time to time, check your stroller for loose screws, worn
parts,torn material or stitching. Replace or repair the parts
as needed. Periodically wipe clean plastic parts with a soft
damp cloth. Always dry the metal parts to prevent the
formation of rust if the stroller has come into contact with
water.
! Excessive exposure to sun or heat could cause fading or
warping of parts.
! If stroller becomes wet, open canopy and allow to dry
thoroughly before storing.
! If wheels squeak, use a light oil (e.g., Silicon Spray, antirust
oil, or sewing machine oil). It is important to get the oil into
the axle and wheel assembly.
85
! When using your stroller at the beach or other sandy/dusty
environments, completely clean your stroller after use to
remove sand and salt from mechanisms and wheel
assemblies.