3. Place the restraint on the vehicle seat rear facing.
Pull the vehicle lap/sash belt out and pass through the
slot in the restraint.
“CLICK”
4. Pass the vehicle belts over
the restraint seating surface
and out the other side.
Engage the vehicle belt buckle.
5. Straps must not
be twisted.
6. Pull the vehicle belts tight.
7. Connect the top tether strap to the
vehicle anchorage point.
2. Pull the vehicle lap/sash belt out and thread
it through the vehicle belt slots at the back of
the restraint.
“CLICK”
3. Engage the vehicle belt buckle.
4. Straps must not
be twisted.
5. Press the restraint
down and pull the vehi-
cle belts tight.
6. Maintain tension on the
vehicle sash belt. Open the
belt lock-off. Slide the sash
belt into it.
2. The white arrow on the
shell must be above the blue
arrow on the base.
11. Store end of web in bag on back of cover.
1
4
6
7
2
4
5
6
7
8. Adjust webbing tension as needed.
Check
Check
• Check vehicle belt connected
securely.
• Vehicle belt pulled tight.
• No twists in straps.
• Top Tether Strap connected
• Tether is tight.
• End of web is in bag.
PULL
PULL
PRESS
5
REAR FACING ONLY
FORWARD FACING ONLY
1
2 3 4 5
INSTRUCTIONS
STORED AT REAR
OF SEAT
REAR F
ACING
ONLY
FORW
ARD F
ACING ON
LY
1
2 3 4 5
INSTRUCTIONS
STORED
AT REAR
OF SE
AT
10. Check tether is tight.
9. Straps must not
be twisted.
• Check vehicle belt connected
securely.
• Vehicle belt pulled tight.
• No twists in straps.
• Top Tether Strap connected
• Tether is tight.
• End of web is in bag.
QUICK REFERENCE FOR INST
ALLA
TION
Quick Reference
- How to install REAR WARD FACING
Quick Reference
- How to install FORWARD FACING
1. Recline restraint to the REAR
FACING blue number.
2
Lap
Belt
Sash Belt
3
REARWARD
FACING BELT
PATH
For complete
instructions on
how to use this
restraint refer to
INSTALLATION
INSTRUCTIONS
8
11
10
9
11. Store end of tether in bag.
1
1. Recline restraint to one of the
FORWARD FACING yellow numbers.
The white arrow on the shell must be
above one of the yellow arrows on the
base.
3
8. Adjust webbing tension as needed.
PULL
PULL
PRESS
8
7. Connect the top tether strap to the vehicle anchor-
age point.
10. Check tether is tight.
9. Straps must not
be twisted.
10
9
11
For complete
instructions on
how to install this
restraint refer to
INSTALLATION
INSTRUCTIONS
More web tension
Less web tension
More web tension
Less web tension
FORWARD
FACING
BELT
PATH
INSTALLATION
INSTALLATION