Operation and maintenance manual
Blender AK/12 AUT Johny
KIOSIDIS PRIVATE COMPANY P.C. Commercial Bar Equipment
5
5. RULES FOR SAFE OPERATION
ATTENTION!
Disobedience of the following rules may cause ac-
cident and possible injure.
♦
The authorized operator should read this instruction manual thorough-
ly and follow the instructions as they are referred in the present hand-
book.
♦
During operation make sure that there is no unauthorized personnel
on site. Children or handicapped people are not allowed to use the
blender.
♦
Do not remove the bowl unless the blender is completely stopped.
♦
Always wait for the blender to stop before you open the bowl’s cover.
♦
Do not try to reach the interior of the bowl during operating.
♦
Do not leave the blender connected to the mains power supply and
unattended at the end of your work, or during cleaning and in case of
malfunction or damage.
♦
Do not stretch the power cord.
♦
Do not use the blender if you notice any malfunction or any operation
problem or if the cord and /or the plug have any problem. Contact
your supplier for more information.
♦
Do not trust the repair and maintenance of your blender to people who
are not authorized by the manufacturer. Contact your supplier for
more information.
♦
Do not proceed to changes related to the blender whatsoever.
♦
Use only spare parts supplied by the manufacturer.
♦
Do not wet the blender parts with water or any other liquid, except for
the bowl.
♦
Never fill the bowl with very hot liquids or with solid ingredients without
a liquid base.
♦
Do not use the blender with empty bowl.
♦
Do not replace the cord by yourselves.
