Operation and maintenance manual
Blender AK/12 AUT Johny
KIOSIDIS PRIVATE COMPANY P.C. Commercial Bar Equipment
19
14. MALFUNCTIONS AND TROUBLESHOOTING
This paragraph contains possible malfunctions and their troubleshoot-
ing. In case a malfunction is not reported below, contact the supplier
company.
Aiming at the continuous improvement of our services and continuous
collaboration with our customers, we kindly request you to contact us in
case of a malfunction not reported in the following table.
No
Malfunction
Possible cause
Troubleshooting
1
The
blender
does not func-
tion
The plug is not connected
to the socket
Connect the plug to the
socket (main power
supply)
The bowl hasn’t been
placed correctly in the
housing and/or the mag-
netic switch is not in place
Check the bowl posi-
tion and re-position if
necessary.
The bowl cover isn’t placed
in its proper position
Place the cover on to
the bowl
The
thermo-switch
has
been activated
Deactivate the thermo-
switch and restart the
blender
2
Excess vibra-
tions
The blender was not in-
stalled on a flat surface
Place the blender on a
flat surface
The bowl is not placed cor-
rectly on its base
Place the bowl correct-
ly on its base
3
Leaks
from
the bowl
Large amount of ingredi-
ents
Remove some ingredi-
ents from the bowl and
never exceed its net
operating volume of
1,5 lt
The bowl’s cover or the lid
are not firmly closed
Close the bowl cover
or the lid firmly
4
Moving tools
(blades)
do
not rotate eas-
ily
Ingredients are too big or
too hard
Decrease the solids’
quantity and add liq-
uids
