15
I2
5
I2
4
I2
3
I2
2
I2
1
I2
0
I1
9
I1
8
I1
7
I1
6
I1
5
I1
4
I1
3
tr
p
t
p
l
n
o
n
l
jp
it
fr
fi
e
n
d
e
c
z
EU Declaration of Conformity
We
JohnsonDiversey Switzerland
CH-9542 Münchwilen
hereby declare that the product described below both in this basic design and
construction and in the version marketed by us conforms to the relevant safety-
and health-related requirements of the appropriate EU Directive.
This declaration shall cease to be valid if modifications are made to the product
without our approval.
Applicable EU Directives:
Low-Voltage Directive (73/23/EEC)
EMC (Electro Magnetic Compatibility) (89/336/EEC), 92/31/EEC in version 93/
68/EEC
Harmonised standards applied:
EN 60 335-1/EN 60335-1-A1/EN 60335-1-A11/EN 60335-2-69/
EN 60335-2-69-A1/EN 50366/EN 55014-1/EN 55014-1-A1/EN 55014-1-A2/
EN 55014-2/EN 55014-2-A1/EN 61000-3-2/EN 61000-3-2-A2/EN 61000-3-3/
EN 61000-3-3-A1
It is ensured through internal measures that series-production units conform at
all times to the requirements of current EU Directives and relevant standards
The signatories act on behalf of company management and with full power of
attorney.
Overview
1
On/Off switch
2
Tilting chassis with bumper
3
Height adjustment screws
4
Carry handle
5
Unlocking device for suction hose
6
Hose connector
7
Canister
8
Squeegee
9
Fixomat squeegee hose connector
10
Filter basket
11
Filter cloth
12
Float housing
13
Suction hose for Fixomat squeegee
14
Fastener catch
15
Vacuum lid
16
Transport handle
Preparation for operation/Operation
Wet vacuuming with vacumat 12, 22, 22T
Check that the float housing is propertly mounted and the machine is ready for
correct cleaning method, if not:
• remove the insert for dry vacuuming and the double filter paper sack.
• empty any debris or dirt from the tub.
Additional information for wet vacuuming with the vacumat 22T
Dry suction with vacumat 12, 22, 22T
Product:
Wet and Dry vacuum cleaner
Name:
vacumat 12, 22, 22T
Model:
S 6.3
230-240V~/50Hz/1000W
Dipl. Ing. (FH) D.Windmeisser
Dipl. Ing. (FH) P. König
2
8
9
5
6
7
1
3
4
10
12
13
14
15
16
11
• 1Pull the fastening catch (1) and lift off the
suction top.
• Insert the float housing back into place.
The arrow must point towards the hose connector.
• Place the ridge of the suction top into the catch
as shown, then press down until you hear the
fastener catch click into place.
• Assemble the wet suction set.
• Attach the suction hose (squeegee) to the connector.
• Attach the tilting chassis handle as shown, and
tighten the height adjustment screws.
• Push the squeegee holder into the specified
opening and rest it as shown in picture two so
that the squeegee is raised from the floor.
The Fixomat squeegee is in the parking
position.
• Loosen the fixation knobs on the squeegee.
• Mount the squeegee and tighten the fixation
screws.
The fixation screws must be positioned above
the squeegee holder.
• Attach the suction hose from the squeegee to the machine hose connector.
• Lift and push the squeegee holder towards the tub and lower the squeegee.
The Fixomat squeegee is in the working position.
• Adjust the squeegee to the floor using the screw [3].
Caution:
The machines may never be used for dry vacuuming without the
double-filter paper sack!
• Pull the fastening catch (1) and lift off the
suction top.
1
2
1
2
1
2
1
2
1
2
3
1
2
