Johnson Travel, Instructions For Use Manual, Page: 15 / 24

15
PARTS
B Ceramic coating soleplate
D Tank window
E Steam control
H Thermostat
L Indicating light
P Folding handle
Q Handle folding key
TEMPERATURE CONTROL
Look for the “iron” symbol on the gar-
ments with the dots indicating the correct
temperature to set on the thermostat of
your appliance.
Follow these instructions.
If the garment does not have any care in-
structions, refer to the following table:
• Nylon and acetate
•• Wool, silk or mixed fabrics
••• Cotton, linen (steam)
These indications relate to the fabric of
the garment and not to any applications
in other materials such as embroideries,
designs, etc.
Fabrics with decorations applied (embos-
sed designs, fabric designs, embroideries)
must be ironed at a moderate tempera-
ture.
If the fabric consists of various fibres, al-
ways choose the temperature suitable to
the fibre that requires the lowest tempe-
rature.
DRY IRONING
Insert the plug into a compatible power
outlet.
Position (E) on “0” to exclude the steam
discharge.
Rotate the thermostat (H) until the pre-
selected temperature indication coincides
with the reference triangle on the tank.
The indicating light (L) turns off when the
set temperature is reached.
After checking that the temperature set is
the one most suitable to the type of fa-
bric, start ironing.
FILLING OF THE WATER TANK
IMPORTANT : to be carried out with the
plug disconnected and the regulator (E)
on the “0” position which excludes the
steam discharge; open the window (D).
Using the cup with the spout (M) slowly
fill the tank with water (do not use addi-
tives).
Make sure the amount of water does not
exceed the MAX level indicated on the
tank.
STEAM IRONING
With the tank full (as indicated in the pre-
vious paragraph), insert the plug into a
compatible power outlet.
Regulate the thermostat (H) to the maxi-
mum temperature (indicated by the sym-
bol •••).
Wait for the indicating light (L) to turn off
signalling that the temperature has been
reached.
Steam ironing is only possible at an ele-
vated temperature, otherwise water may
leak from the sole plate (B).
Set the steam control (E).
At this point, it is possible to start steam
ironing until the water is used up.
After use and before storing the ap-
pliance away, disconnect the plug from
the power outlet and empty the tank.
FOLD THE HANDLE
To make the appliance more compact, fold
the handle (P) by pressing the key (Q).
CLEANING
With the plug disconnected and the iron
cold, clean the appliance and the ceramic
coating soleplate with a soft cloth.
Any operations for cleaning scale depo-
sits are not covered by the warranty, and
therefore are at the expense of the custo-
mer.
Any operations for cleaning scale deposits
are not covered by the warranty, and the-
refore are at the expense of the customer.