Johnson T3X, Service Manual

Page: 33 / 69

33
CHAPTER 4: 1XE/T-1XE3XE CONSOLE SPECIAL MODE
4.16 Hardware
Category Name Default Range Units Comments
Hardware
ErP
No
Check Check/No
Check
--
Enables/Disables ErP which puts the
console in a low power mode after a
certain amount of time determined by
ErP Timeout. The LMC keys need to
be pressed to wake up the console.
ErP
Timeout
30 1-60 Minutes
Amount of time after which the console
enters a low power mode.
Backlight
Bright-
ness
100 0-100 --
Set the brightness of the screen. Note
that plugged in the brightness will de-
fault to 100%, but on self-power will
follow the self-power algorithm (40%
below 50 RPM, 80% at or above 50
RPM)
Master
Volume
5 0-30 --
All apps have their volume maxed, this
sets the system-wide volume. The vol-
ume matches the DQE standard. Does
not affect the system beep volume.
4.17 Service
Category
Nam
e
De-
fault
Range Units Comments
Service
Ser-
vice
History
-- --
Battery, Belt: Drive, Belt: Gener-
ator/Flywheel, Belt: Running and
Flip Deck, Belt: Running and
New Deck, Chain: Drive, Chain:
Stair, Console Cable, Reset
Headphone Accumulators, Reset
Accumulated Time, Reset Accu-
mulated Distance, Reset Total
Floors, Reset Factory Defaults
Generates a service entry
from the service items listed
in a log that is kept on the
machine and sent to DAPI
(for things like Asset Man-
agement). Tap Create to
create the entry for the se-
lected Service Type.
4.18 Errors
You will also see errors in engineering mode and service mode.
Category Name Default Range Units Comments
Errors
Error
Log
-- Clear All
Error code, first occur-
rence, last occurrence
Error history that can be
cleared with the clear all
button. Lists the error
code that experienced by
the console, the first and
the last occurrence and
that error code and how
many times it has hap-
pened since the first oc-
currence.