22
always empty the tank (C) from the remai-
ning water.
TRANSPORT
After having cooled the iron (B), emptied
the remaining water tank (C) and inserted
the power supply cable (H) and the single-
pipe (G) in its seat, position the iron (B)
correctly on the base ( TO).
Raising the hook (L) until a click is heard,
the iron (B) is locked with the base (A)
allowing easy transport of the entire iro-
ning system.
CLEANING
When the iron is cold and switched off,
clean the surface of the plate and the
appliance with a damp cloth.
The appliance must not be cleaned with
anti-limescale products.
Check that there are no traces of water
on the ironing plate, these could stain it.
