19
COMPONENTS
A. Cold air shot button
B. 3 temperature selector
C. “ON / OFF” se 2 air speeds
D. Intakes
E. Ring for attachment to the wall
F. Deflector
G. Diffuser
H. Air emission
L. Filter holder
M. Filter
Remove the appliance parts from the
package and dispose of the packaging
components according to the law. Check
that the product is intact and that all
components are present. In the event of
obvious anomalies or transport damage,
do not use the appliance, but contact the
retailer or an authorized service center.
INSTRUCTIONS FOR USE
Make sure your hands are completely dry,
after setting the selector (C) to “0” insert
the plug into a suitable electrical outlet.
Set the speed with the selector (C):
“0”: device switched off
medium air flow, for drying slightly
damp hair.
strong air flow, for quick hair
drying.
Set the temperature with the selector
(B):
“0”: minimum temperature
medium temperature for delicate
drying.
high temperature for quick drying
Proceed to dry the hair. When the hair is
dry, turn the selector (C) back to “0” and
disconnect the plug from the electrical so-
cket.
IMPORTANT:
the device is equipped with the “JOHNSON
INTERCOOLER” patent by means of which
it is possible, by rotating the filter holder
(L), to adjust the air pressure until the
most suitable for drying your hair is obtai-
ned (Fig.1).
RING FOR HANGING
Once you have finished using it, you can
hang the product, thanks to the special
ring (E).
USE OF THE DEFLECTOR
The removable deflector (F) directs the air
flow to a precise point. Its use is recom-
mended for drying or modeling localized
areas, so as to make the desired hairstyles
more easily.
To mount this accessory, center it on the
tip of the hairdryer (H) and exert a slight
pressure towards the appliance.
To remove it, exert a slight pull towards
the outside.
N.B .: before removing it, always wait un-
til the deflector (F) has cooled down.
USE OF THE DIFFUSER
The diffuser (G) avoids the concentration
of air in a particular area of the hair. It al-
lows to give more volume, with a more de-
licate drying, to the hair thanks also to the
flow of air it generates.
To mount this accessory, center it on the
tip of the hairdryer (H) and exert a slight
pressure towards the appliance.
To remove it, exert a slight pull towards
the outside.
N.B .: before removing it, always wait un-
til the diffuser (G) has cooled down.
L
Fig.1