9
12.
ALARM OFF
•
Use this button to turn the ALARM off
after it sounds.
13.
SNOOZE
•
Use this button to delay the ALARM for 5
additional minute after the ALARM sound.
14.
AL1-B INDICATOR
•
This indicator shows that the unit is in
ALARM-1 buzzer mode.
15.
AL1-R INDICATOR
•
This indicator shows that the unit is in
ALARM-1 radio mode.
16.
AL2-B INDICATOR
•
This indicator shows that the unit is in
ALARM-2 buzzer mode.
17.
AL2-R INDICATOR
•
This indicator shows that the unit is in
ALARM-2 radio mode.
18.
BATTERY COMPARTMENT
•
Compartment for the back-up battery
(1 pc. CR2032 button cell battery)
19.
SPEAKER
•
Sound output.
20.
DC JACK
•
Connect the unit to the AC/DC adaptor.
21.
FM WIRE ANTENNA
•
Extent the wire antenna to obtain better
FM broadcasting.
CONNECTING THE UNIT TO POWER
Plug one end of the AC adaptor into the DC
power Input, and then plug the other end into
AC wall outlet.
Before switching on the unit, make sure that the
voltage of your electricity supply is the same as
that indicated on the rating plate.
BATTERY BACKUP
Insert one piece CR-2032 button cell battery
into the battery compartment.
Be sure to observe the proper polarity (the "+"
and "-" signs) as indicated inside the battery
compartment.
In case of power failure or interrupted AC
power, the current time and alarm time set-
tings, the stored radio stations are preserved in
the memory of the unit by means of battery
back-up function.
SETTING THE CLOCK
With the unit powered off, press the PRESET
button.
The time will begin to flash on the LED display.
Press the TUN UP/HR button to adjust the hour.
Press the TUN DN/MIN button to adjust the mi-
nute.
When the correct time is selected, press the
PRESET button again to confirm.
SETTING THE ALARMS
With the unit powered off, press THE VOL+/AL1
or VOL-/AL2 button. The alarm time will begin
to flash on the LED display.
Press the TUN UP/HR button to adjust the alarm
hour.
Press the TUN DN/MIN button to adjust the
alarm minute.
When the correct time is selected, press the
VOL+/AL1 or VOL-/AL2 button to confirm.
Press the VOL+/AL1 or VOL-/AL2 to select the
ALARM sound mode - buzzer or currently set
radio station.
SNOOZE FUNCTION
Whenever the alarm (radio or buzzer) comes on,
it can be temporarily suspended for a short pe-
riod of 9 minutes by pressing the SNOOZE but-
ton once.
The buzzer or radio will then automatically
come on again after the 9 minutes ‘Snooze’ pe-
riod has ended.
This procedure can be repeated for up to ap-
proximately one hour.
LISTENING TO THE AM/FM RADIO
Press the POWER button to turn on the Radio.
Press the BAND button to select AM or FM band.
Press the TUN UP/HR or TUN DN/MIN buttons
step by step to tune to the desired radio sta-
tions.
Press and hold the TUN UP/HR or TUN DN/MIN
buttons for approx. 1 second, it will start to se-
arch the next radio station in the direction of
the search.
The search operation simply finds stations with
strong signals.
Stations with weak reception can only be tuned
in manually.
SAVING A RADIO STATION TO THE MEMORY
Tune the radio to the desired station.
Press the PRESET button.
Press the MEM+ or MEM- button to select a me-
