27
COMPONENTS
A. Luminaire body
B. Vaporizer nozzle
C. Safety cap
D. Steam dispensing button
E. Steam delivery safety slider
F. Handle
G. Power cable
H. Light indicator
L. Funnel
M. Measurer
N. Round brush
P. Curved terminal
Q. Long terminal
R. Corrugated extension
S. Brush terminal
T. Accessory for doors and / or windows
V. Brush cover cloth (S)
INSTRUCTIONS FOR USE
Remove the appliance parts from the
package and dispose of the packaging
components according to the law. Check
that the product is intact and that all
components are present. In the event of
obvious anomalies or transport damage,
do not use the appliance, but contact the
retailer or an authorized service center.
Operating procedures
Tank filling (first use)
Fill the boiler before use, operation to be
carried out with the plug disconnected
from the electrical socket.
Place the device on a flat and stable sur-
face, push the safety cap (C) down and
unscrew it by turning it counterclockwise.
Insert the funnel (L) into the hole. Take
clean water with the measuring cup (M)
and pour it through the funnel (L) into the
tank (maximum capacity 250 ml). Do not
overfill the tank.
Replace the cap (C) and screw it on by tur-
ning it clockwise (tighten well).
Power on
Make sure that the mains voltage is the
same as that indicated on the technical
data label and that the system is compa-
tible with the power of the steam cleaner.
Install the desired accessories according
to use.
Insert the plug into an electrical socket su-
itable for receiving it.
After about 5 minutes of heating, the ap-
pliance is ready (the indicator light (H)
turns off).
At this point, slide the steam delivery
safety slider (E) located on the steam de-
livery button (D) forward. Lightly press
the button (D) down and check that the
steam actually comes out.
If anomalous steam escapes, immediately
release the steam button (D) and block it
with the cursor (E). Turn off the applian-
ce by removing the plug from the socket,
wait for it to cool down before emptying
the tank and take it to an authorized servi-
ce center for the necessary checks.
During normal use, to stop the delive-
ry of steam, release the button (D) and
always lock it with the cursor (E).
Installation of accessories
Choose the right accessory for the job you
will have to do.
Long Terminal Installation (Q)
or brush terminal (S)
Grasp the long terminal (Q) or the brush
terminal (S) and center it on the vaporizer
nozzle (B). Push all the way in and fix the
chosen terminal with a clockwise rotation.
Once the work is finished or when the
accessory needs to be replaced, turn the
D
E