9
COMPONENTS
A)
Water tank
B)
Inox plate
C)
Spray button
D)
Water tank cover
E)
Steam regulation knob
F)
Pushbutton for “spray”
G)
Pushbutton for steam
H)
Thermostat
I)
Light indicator
L)
Cable spherical joint
M)
“Self-cleaning” button
INSTRUCTIONS FOR USE
In order to avoid overload to the electric
network, avoid using on the same circuit
and at the same time other appliances
with high voltage
SETTING THE TEMPERATURE
Look for the iron on the garment label
with the indication in dots for the right
temperature to set on the thermostat of
your appliance. Iron the garment follo-
wing this indication.
If the garment does not have a label fol-
low following table:
•
Nylon and acetate
••
Wool, silk and mixed fabrics
••• Cotton, flax (steam)
These indications concern the fabric of
the garment and not the eventual appli-
cations in other materials as embroidery,
drawings; etc… the fabrics with applied
finishing (embossed drawings, embroide-
ries) should be ironed at medium tempe-
rature
In case the fabric is composed of various
fibres always choose the temperature
suitable for the fibre that requests the
lowest temperature.
IRONING WITHOUT STEAM
1)
Insert the plug in a suitable wall socket
2)
With
E
exclude the emission of steam
3
) Turn the
H
thermostat until the indica-
tion of the chosen temperature matches
with the reference triangle that is on the
tank. The pilot light
I
will turn off when
the requested temperature is reached.
4)
Now you can iron remembering to
check the temperature requested as by
the type of fabric.
WATER TANK FILLING
5)
With plug disconnected
6) Important:
During filling of the water
tank,
E
must be in the position that exclu-
des the emission of steam.
7)
Open the lid D.
8)
Fill tank
A
with water (without additi-
ves).
Position the iron in a vertical position to
make sure the amount of water does not
exceed the maximum level.
STEAM-IRONING
9)
With the water tank already filled
(as indicated in preceding paragraph)
insert the plug in a suitable wall socket.
10)
Regulate the
H
thermostat at the
maximum temperature (indicated with
(•••)
Wait until the pilot light turns off, this indi-
cates that the requested temperature has
been reached. The steam ironing is pos-
sible only with high temperature, in the
contrary; you could have water lose from
the plate.
11)
With
E
select the quantity of steam
(min. or max.)
12)
Now you can iron with steam until
the water is finished. When you have
finished ironing remove the plug (15)
and empty the tank (16) before storing
the iron.
