15
based on the frequency of use and the di-
mensions of the area to treat. Replace if
necessary.
Ensure the unit is off before replacing the
head.
With one hand hold the head, while with
the other press the release button (C),
positioned on the side of the unit, so the
head will be removed.
Install a new abrasive roll (I) by simply
pushing it downwards, until you hear a
“click”. Ensure the head is correctly inser-
ted and blocked.
Note: it is forbidden to use the appliance
without the head and abrasive roll.
CLEANING AND MAINTENANCE
Clean the appliance after each use to gua-
rantee the best performance.
The device is water resistant; it can be rin-
sed under running water to clean it. Remo-
ve the protective cover (A) from the head.
Clean the head with the brush (L) supplied.
Do not switch on the appliance while a cle-
aning cycle is in progress.
The unit can be rinsed under a tap. It can
at times be positioned, leaving the head
to rotate under running water for 5 to 10
seconds.
Clean the appliance casing with a dry and
clean cloth. Reposition the protective co-
ver.
When the appliance is not in use, place it
out of reach of children. Do not position
the appliance in a zone with excess heat
or humidity.
