26
is plugged into a properly installed power
outlet with:
AC 220-240V, 50-60Hz.
Code E5 o E6
Cause:
The appliance is overheated..
Solution:
Disconnect the plug from the
socket of power and wait until it is coo-
led down, if the problem persists, contact
customer service or an authorized service
center specifying the error code
SPECIAL WARNINGS
1. Before placing a pan on the hob, make
sure that the bottom of the pan and the
hob are perfectly clean.
2. Before use, check that the plug and so-
cket are in perfect condition. Any contact
problems between them can easily dama-
ge the induction cooker.
3. When heating, do not put on
never paper, aluminum, cloth or other fo-
reign objects on the hob to avoid any ac-
cident.
4. Do not use the induction cooker on a
carpet, tablecloth, paper, etc ... as they
can block the air intakes or exhaust air,
negatively affecting the dissipation of heat
from the appliance.
5. Never unplug the induction cooker du-
ring operation.
6. If you are not using the appliance, always
disconnect the plug from the mains.
7. Violent impacts on the cooking plate
can cause damage.
In case of damage to the appliance, please
stop using it and send it to a service cen-
ter for verification and hypothetical repair.
8. Avoid contact between the control pa-
nel and a sharp object that could damage
or break it.
9.Never use the induction cooker on a gas
cooker (magnetic emissions are able to
heat the iron parts of the cooker) to avoid
any accident.
CLEANING AND MAINTENANCE
Before cleaning, disconnect the stove from
the power supply and make sure that the
hob has completely cooled down.
1. Hob and control panel
Lightly soiled: please clean with a soft
damp cloth.
Presence of grease: clean first with a soft
cloth and neutral detergent to remove the
grease.
Then clean with a soft damp cloth until
all residues disappear. Caution: Never cle-
an the stove surface with a stiff brush or
abrasive sponges.
2. Air intake and air outlet.
The body of the induction cooker should
be cleaned gently with a dry and soft cloth.
The dust around the air inlet and outlet
grilles can be cleaned with a flexible brush
or a soft cloth.
Warning: NEVER wash the induction coo-
ker with water.
