17
COMPONENTS
A. Motor body
B. Normal speed activation button
C. Turbo speed activation button
D. Hand blender stem
E. Stem with whip
F. Chopper blades
H. Container
H1. Lid notch insertion seats
L. Container lid
L1. Cover notches
M. Graduated measuring cup
USE AS A BLENDER AD
IMMERSION
With unplugged plug.
- Fit the blender stem (D) to the body
motor (A). Make the “open padlock mark
on the blender stem coincide with the
triangle on the motor body. Press in and
turn counterclockwise.
- Insert the plug into a suitable socket to
receive it.
- Immerse part of the blender stem in the
containers containing the food to be trea-
ted. Do not place an excessive amount of
food to be processed in the container and
do not immerse the blender stem over the
limit. This avoids, when switched on, food
leaking from the container or damage to
the motor body due to contact with the
food to be processed.
-Press the activation button (B or C) accor-
ding to the desired speed.
. Avoid continuous operation for times
longer than 30 seconds.
Release the button at intervals to allow the
engine to cool and rest.
If, following continuous activations, the
appliance overheats! Leave it on pause for
10 minutes until it has completely cooled
down.
- After processing, remove the plug from
the socket.
Disassemble and clean the blender stem
and motor body before putting the ap-
pliance away or before starting a new pro-
cess.
USE AS A BEATER
With unplugged plug
- Fit the stem with whip (E) to the motor
body (A).
Make the “open padlock” mark on the
stem with whip coincide with the triangle
on the motor body.
Press in and turn counterclockwise.
- Insert the plug into a suitable socket to
receive it.
- Immerse part of the whisk in the contai-
ner containing the food to be treated.
Do not place an excessive amount of food
to be processed in the container and do
not immerse the whisk over the limit. This
prevents the chin from leaking out of the
container when it is switched on or dama-
ge to the motor body due to contact with
the food to be processed.
- Press the activation button (B or C)
depending on the desired speed.
Avoid continuous operation for times lon-
ger than 30 seconds.
Release the button at intervals to let the
engine cool down and rest.
If the appliance overheats following conti-
nuous activations! Leave it on pause for 10
minutes until it cools completely
chin.
- After processing, remove the plug
from the socket.
Disassemble and clean the stem with
whisk and motor body, before putting the
appliance away or before starting a new
process.
USE AS A MINCER
Insert the accessory into the container (H)
required: Blades (F) for mincing or shred-
ding.
Center the accessory on the pin on the
bottom of the container.
- Introduce the food to be treated into the
container.
Do not put an excessive amount of food in
the container, this is to prevent the excess
food from escaping from the container
when turned on.
Put the lid (L) on the container.
Make the 3 notches (L1) of the lid coincide
with their seats (H1) placed in the contai-