16
The device must not be covered so as to
avoid risk of causing a fire.
Once the unit has been connected to a so-
cket and switched on, it reaches the wor-
king temperature in just a few seconds.
The heater head must not be touched du-
ring use.
Do not immerse the device in water to clean
it.
The surface where the device is to be po-
sitioned must be stable, wide, not sloping
(as the device could fall over), and level so
the safety switch at the base of the device
functions correctly. This switch interrupts
operation if the device falls over. The devi-
ce must not be moved by pulling the power
cord.
If the power cord is damaged it must be
substituted by the manufacturer or the ma-
nufacturer’s technical service by qualified
personnel. The power cord must not be pla-
ced where it could be gripped by a child.
The use of any type of electrical equipment
involves the observance of fundamental ru-
les and regulations, in particular:
• the device must not be touched with
wet hands or feet
