Johnson CALC-1500, Operator'S Manual, Page: 13 / 48

© 2022 Johnson Level & Tool — 8
GETTING STARTED
x 2 : Squares a linear or non-dimensional
value .
Total Cost : Based on entry of per unit cost .
Store Weight per Volume : Stores a new
Weight per Volume value as listed below:
Note : After entering a value and pressing
Conv
0
, continue pressing the
0
digit
key until you’ve reached the desired
Weight per Volume format . To recall your
setting, press
Rcl
0
.
• Ton Per CU YD
• LB Per CU YD
• LB Per CU FEET
• MET Ton Per CU M
• kG Per CU M
This value is stored until you change it or
perform a Clear All (
Conv ×
) .
On-Center Spacing (o.c.) : Stores a new
on-center spacing (e .g .,
2 4 Inch Conv
5
) . The value is used for jack and rake
wall stud calculations . Default is 16" .
Conv
Conv
Conv
Conv
•
0
5
√ x