manualshive.com logo in svg

Johnson C8000, Owner'S Manual

Share
Download
Johnson C8000 Owner'S Manual Download Page 11

19

18

J O H N S O N   B I K E   C 8 0 0 0   /   R 8 0 0 0

J O H N S O N   B I K E   C 8 0 0 0   /   R 8 0 0 0

STEP 1

ASSEMBLY STEPS

STEP 2

ë

REAR FOOT

     Install the rear foot in position at the rear of the bike with the mating holes in the frame
     bracket. Insert the four screws (Z04) through the frame bracket and rear foot. Using the #5
     Allen Wrench (Z32) tightens the screws securely.

ë

PEDALS

     Install the pedals on the pedal cranks using the Open Wrench (Z31). The JOHNSON logo
     on the pedal strap must point upward.

    NOTE:

 Be careful to align the threads correctly to avoid damage. A little grease on the threads

     should help the pedals to screw in easily and correctly. Turn the left pedal spindle counter
     clockwise when threading into the crank arm, and turn the right pedal spindle clockwise
     when threading into the crank arm.
 

Pull the heart rate wire through the hole in the bottom of the seat frame, and make sure the 
wire get through the tunnel of the plate. Mount the seat handlebars to the seat frame by 
using three socket-flat-head screws (Z05).

STEP 3

ë

Install the seat rail on the seat adjustment bracket using the four washers (Z10) and screws

    (Z09). Tighten them with the #5 Allen Wrench (Z32).

ë

Connect the wire harness from the seat handlebar to the wire harness coming from the

    seat frame.

ë

Slide the seat adjustment handle between the teeth of the seat adjustment bracket. Insert

    two spring washers (Z12) and socket head screws (Z11), and tighten with the #4 AllenWrench.

Z04

4

R

L

Z05

L R

Z09
Z10

Z11

Z12

Summary of Contents for C8000





















Reviews:

No comments

Brands by name

Popular brands

Load more brands