15
Device designed for communities
and sporting environments,
it ensures
complete safety to the user.
INSTALLATION
Designed to be wall-mounted.
Please carefully follow the instructions for
installation given.
Do not rest the device on top of sinks,
tubs, showers or any places where, even
exceptionally, it may come into contact
with water.
For fixing with double-sided adhesive
tape, thoroughly clean the wall where you
want to mount the unit, remove the plastic
protective film of the adhesive tape, place
the bracket against the wall and press
firmly for a minute.
CAUTION due to the ageing of the tape or
of any other adhesive mean used, the
piece may come off. To secure the device
with the anchors, drill with a 5mm dia-
mond tip the wall using the bracket as a
template, insert the two anchors into the
wall and tighten the screws until the devi-
ce is securely fastened
.
The HIGH writing must result at the top,
turned towards the device.
The device is installed via a cable with plug
letting out the cable from the suitable
grooves.
After positioning the cable, place the
device on top of the bracket and slide it
downward until it stops.
To remove the body from the bracket
press the support lever with a screwdriver
and remove the device upwards.
USE
BASIC Model:
to start it up, simply remove the handle.
To turn it off reinsert the handle into its
housing.
Model with
SPEED ADJUSTMENT SYSTEM:
device equipped with 6-position switch to
obtain the following variants:
• OFF
• slow speed cold temperature
• maximum speed cold temperature
• slow speed minimum temperature
• maximum speed average temperature
• maximum speed maximum temperature
Model with
ELECTRONIC TIMER and LIGHT POINT
equipped with a courtesy light blue color
that remains always on with plug inserted
and timer that allows a continuous
operation for about 10 minutes. At
the end of the pre-set time, the device
switches off automatically and to turn it
back on, simply reinsert the handle into its
housing.
Model with
SHAVER SOCKETS, USB SOCKETS and
LIGHT POINT
in addition to being equipped with an
electronic TIMER which defines the opera-
tion
time, the device is fitted with both Euro-
pean
and American sockets for the use
of the shaver and a USB socket for char-
ging electronic devices such as mobile
phones up to a maximum of 100mA. A
blue courtesy light point is always on with
power on complete this wall-mounted hai-
rdryer.
DO NOT INSERT into the socket other elec-
trical
appliances such as hair dryers, irons
or heaters, as they will damage the unit.
WARNINGS
During use, the device should never be
covered
with towels or the like. It does not
require special maintenance, the dust can
be removed using a damp cloth: do not
use abrasive or corrosive products.
In case of failure of the device please turn
to an authorized service centre.
Summary of Contents for BASIK
Page 2: ...2 ...
