©2012 Johnson Level & Tool
13
Level Button/LCD Backlight Button:
Push this button once to start self-leveling after the laser has been
moved in TILT mode. Hold this button in for three seconds to turn on
the LCD backlight.
Remote Channel Button:
Push this button to switch the remote channel from CH1 to CHF.
Vertical Applications:
Place the laser on its side using the vertical bracket. Center the
circular bubble vial with the use of the leveling knobs. All functions
work except the grade setting function. When the laser is in the self-
leveling mode, the Z-axis is self-leveling. Press the buttons
to make the laser line move left or right. In Manual mode, the Z-axis
is not self-leveling, press the button for two seconds to enter into
the X-axis manual adjusting mode. Press the buttons to
make the laser line move left and right. Press the button again
to enter the Y-axis manual adjusting mode. Press to make
the laser split beam/dot move up or down.
Note:
A short press of the buttons will adjust the line slowly.
Holding down the buttons will move the line quickly.
6274H-1-All_Manuals 9/26/12 10:55 AM Page 13