14
©2015 Johnson Level & Tool
Scan Mode
1. Press the scan mode button (see figure) on either the
laser keypad or remote to activate scan mode and scan
angle is 180º.
2. First press - 180º; Second press - 90º; Third press - 45º; Fourth
press - 10º; Fifth press - 45º; Sixth press - 90º; Seventh Press - 180º.
3. To return to rotating, press the speed adjustment button.
Rotating the Scan Line
1. Press the clockwise button on either the laser keypad
or remote and the scan line moves to the right.
2. Press the counter-clockwise button and the scan line moves to
the left.
Vibrate/V-W-S Mode
Push this button once to activate the vibrate mode. Note: If
laser is in manual mode, pushing the V-W-S button will
exit manual mode. Also the TILT mode will automatically be on
and can not be turned off. In this mode, the laser will not react to
slight vibration near the laser. To turn the V-W-S mode off, push
the button again.
Manual (Man) Slope Mode
1. Press the slope mode button once (see figure) on the laser
keypad to enter into the X-direction single slope mode.
The X and Slope LED will turn on. This will put the laser into
single axis slope mode.
8489H-All_Manuals 11/18/14 11:50 AM Page 14