www.johnsonsystems.com
8
Load Circuit Neutral
Output Terminals
Load Circuit Neutrals
Ground Input
Load
Circuit
Grounds
Power Supply Connection Details
Neutral Power Distribution Block
Neutral Input Terminal
• Use wire size #14 to #1/0 AWG. Strip insulation length to 0.65" (16.5mm).
• Torque neutral terminal(s) to 45-50 IN-LBS (5.0-5.6 NM).
Capable of single or dual rated neutral termination. The neutral terminal may be
mounted on the top or bottom of the distribution block to facilitate top or bottom
wire entry. To change the position of the neutral terminal, remove the 1/4-20 x
1/2" mounting bolt (use a 7/16" wrench or socket), move into place, and tighten
the mounting bolt to 45-50 IN-LBS (5.0-5.6 NM).
Load Circuit Neutral Output Terminals
• Use wire size #14 to #8 AWG. Strip insulation length to 0.315" (8mm).
• Torque load circuit neutral terminals to 20-25 IN-LBS (2.3-2.8 NM).
Models JS-ICON
™
2410, JS-ICON
™
2413 and JS-ICON
™
1210/620 are supplied
with 25 load circuit neutral terminals, while Model JS-ICON
™
1220 is supplied with 12.
NOTE:
For connection use copper wire only, rated for 167°F (75°C) minimum.
Ground Connection Details
Ground Input Terminal
• Use wire size #14 to #1/0 AWG. Strip insulation length to 0.65" (16.5mm).
• Torque ground terminal to 45-50 IN-LBS (5.0-5.6 NM).
The ground input terminal may be rotated up to 360 degrees to facilitate top or
bottom wire entry. To rotate the ground terminal, loosen the 1/4-20 lock-nut (use
a 7/16" wrench or socket), rotate terminal into place, and tighten the lock-nut to
45-50 IN-LBS (5.0-5.6 NM).
Load Circuit Ground Output Terminals
• Use wire size #14 to #8 AWG. Strip insulation length to 0.315" (8mm).
• Torque load circuit ground terminals to 20-25 IN-LBS (2.3-2.8 NM).
Models JS-ICON
™
2410, JS-ICON
™
2413 and JS-ICON
™
1210/620 are supplied
with 25 load circuit ground terminals, while model JS-ICON
™
1220 is supplied with 12.
NOTE:
For connection use copper wire only, rated for 167°F (75°C) minimum.