manualshive.com logo in svg

JOHNSON SYSTEMS CS-IPRO, User Manual

Share
Download
JOHNSON SYSTEMS CS-IPRO User Manual Download Page 6

www.johnsonsystems.com

6

Quick Programming Reference

 

to System Configuration Menu Items

1.  CHECK 

Check the DMX channel patch for each of the sliders.

 

PATCH 

Checks the patch saved in the CS-IPRO memory only.

2.  EDIT 

Edit the patch and assign DMX channel(s) to each of the sliders.

 

PATCH 

Edits the patch saved in the CS-IPRO memory only.

3.  CLEAR 

Clear the DMX channel patch for a selected slider or all sliders.

 

PATCH 

Clears the patch saved in the CS-IPRO memory only.

4.  SET CS 

Set the DMX channel patch for a CS-DMX control station.

 

PATCH 

Transfers the patch from CS-IPRO memory to control station memory.

5.  GET CS 

Get the existing DMX channel patch from a CS-DMX control station.

 

PATCH 

Transfers the patch from control station memory to CS-IPRO memory.

6.  SAVE 

Save the DMX channel patch into the removable EEPROM Memory Module.

 

PATCH 

Saves the patch in the CS-IPRO memory only.

7.  LOAD 

Load the DMX channel patch from the removable EEPROM Memory Module.

 

PATCH 

Loads and saves the patch into the CS-IPRO memory.

8.  EEPROM 

View the type of EEPROM memory module plugged into the CS-IPRO.

 

IPRO-X 

9.  EEPROM 

Load new firmware into the CS-IPRO via the EEPROM memory module.

 

FW-LOAD 

10.  EDIT KEY 

Edit the security key for the CS-IPRO.

 

SECURITY 

11.  SET KEY 

Set the security key for a CS-DMX control station.

 

SECURITY

12.  GET KEY 

Get the existing security key from a CS-DMX control station.

 

SECURITY

13.  MONITOR 

Monitor the slider level on a CS-DMX control station.

 

SLIDER

14.  CHECK CS 

Check the firmware version running on the CS-DMX control station.

 

FIRMWARE

15.  FIRMWARE 

View the firmware version running on the CS-IPRO microcontroller.

 

VER X.X

16.  SERIAL  # 

View the CS-IPRO unique six-character silicone serial number.

 

XXXXXX 

17.  BATTERY 

View the CS-IPRO battery voltage level and status.

 

X.X OKAY 

18.  PRINTOUT 

Printout the DMX channel patch for a selected slider or all sliders.

 

PATCH 

Prints out the patch saved in the CS-IPRO memory only.

19.  LCD VIEW 

Adjust the contrast of the LCD Display for optimum viewing.

 

ADJUST 

NOTE: Refer to page 11 for typical application procedures.

Summary of Contents for CS-IPRO













Reviews:

No comments

Brands by name

Popular brands

Load more brands