JOHNSON CONTROLS
33
SECTION 3 - DIMENSIONS, NOzzLE ARRANGEMENTS AND WEIGHTS
FORM 160.78-N1
ISSUE DATE: 5/30/2012
3
FIGURE 27 -
CONDENSERS - 150 PSI MARINE WATER BOXES
Condenser
Shell Code
1-Pass
2-Pass
3-Pass
F
I
F
I
G
F
I
CA21
1' - 8-9/16"
(522)
0' - 9-3/4"
(248)
1' - 4-7/16"
(418)
0' - 7-11/16"
(195)
0' - 5-13/16"
(148)
1' - 4-7/16"
(418)
0' - 7-11/16"
(195)
CA25
1' - 11-1/4"
(591)
0' - 11"
(279)
1' - 7-1/8"
(486)
0' - 8-15/16"
(227)
0' - 6-5/16"
(160)
1' - 7-1/8"
(486)
0' - 8-15/16"
(227)
LD14021
NOTES
:
1. All dimensions shown in Ft/In (mm)
2. All dimensions are approximate. Certified dimensions are available upon request.
3. Standard water nozzles are Schedule 40 pipe size, furnished as welding stub-outs with ANSI/AWWA C-606 grooves, allowing the option
of welding, flanges, or use of ANSI/AWWA C-606 couplings. Factory-installed, class 150 (ANSI B16.5, round slip-on, forged carbon steel
with 1.6 mm raised face), water flanged nozzles are optional (add 13 mm to nozzle length). Companion flanges, nuts, bolts, and gaskets
are not furnished.
4. One-, two-, and three-pass nozzle arrangements are available only in pairs shown and for all shell codes. Any pair of evaporator nozzles
may be used in combination with any pair of condenser nozzles. Compact water boxes on one heat exchanger may be used with Marine
Water Boxes on the other heat exchanger.
5. Condenser water must enter the water box through the bottom connection for proper operation of the sub-cooler to achieve rated perfor-
mance. Add dimension "M" as shown on pages per unit dimensions page for the appropriate isolator type.
CONDENSER NOZZLE ARRANGEMENTS (150 PSI MARINE WATER BOXES)
