Johnson Controls YORK OPTIVIEW CONTROL CENTER, Operation Manual

Page: 83 / 142

JOHNSON CONTROLS
83
SECTION 2 - OPTIVIEW OPERATION
FORM 160.10-O1
ISSUE DATE: 4/27/2018
2
PROGRAMMABLE
None
NAVIGATION
Home
Access Level Required: VIEW
Returns the display to the Home screen.
Diagnostics
Access Level Required: VIEW
Returns the display to the Diagnostics screen.
External
Access Level Required: SERVICE
This key toggles the display from internal input/output
view to the external I/O board view.
Internal
Access Level Required: SERVICE
This key toggles the display from external input/output
channels to internal input/output view.
OVERVIEW
This screen displays the activity for each of the digital
inputs and outputs that are connected to the OptiView
Control Center. The digital screen is useful to service
technicians checking operation of digital inputs and
outputs as well as program jumper and switch posi-
tions.
Requires a login access level of SERVICE
to view. Service technicians refer to Op-
tiView Control Center Retrofit Kit - Trane
Service Manual (Form 160.10-M1) for
further explanation of displayed values.
DISPLAY ONLY
This screen displays each of the internal and external
digital input/outputs connected to the OptiView Con-
trol Center. An LED beside each input/output indicates
activity. The tag beside each LED indicates that the in-
put/output is a DIP switch, a jumper (JP), a relay (K),
a Terminal (TB#) or the channel for the external digital
input/output view.
DIAGNOSTICS - DIGITAL SCREEN
ID10023
FIGURE 33 - DIGITAL DIAGNOTSTIC SCREEN