Installation Procedure
21
Electric wiring
For the detailed wiring connection with the indoor units, see the corresponding indoor operation and instruction
manual.
Wiring connection
Make wiring to supply power to the outdoor unit, so that the power for the indoor unit is supplied by terminals.
WARNING
DO NOT CONNECT THE NEUTRAL WIRE TO , OR PHASE.
INTERCONNECTING WIRES MUST BE WIRED ACCORDING TO FIG.1 FIG.2 INCORRECT WIRING CAUSE EQUIPMENT
DAMAGE.
N
R S
T
Wiring procedure
1) Remove set screws on the side before taking off the front panel toward the direction shown in figure.
2) Connect wires to the terminal block correctly and fix the wires with a wire clamp equipped nearby the terminal block.
3) Route the wires in a proper way and penetrate the wires through the opening for electric wiring on the side panel.
FIG.2
FIG.1
Y/G
To Indoor Unit
POWER SUPPLY:
1PH,220V~,50Hz
Y/G
Y/G
To Indoor Unit
POWER SUPPLY:
1PH,220V~,50Hz
YIFFYC012BAEFA
YIFFYC018BAEFA
Summary of Contents for YIFFZC012BAEFA
Page 23: ......
