Table 16: VAV1717 and VAV1732 controller
Specification
Description
Air pressure differential sensor
Range: -500 Pa to 500 Pa (-2.0 in. H2O to 2.0 in. H2O)
Performance characteristics:
Zero point accuracy: 0.1 Pa
Span accuracy: 3% of reading
Actuator rating
4 N·m (35 lb·in) minimum shaft length = 44 mm (1-3/4 in.)
Mounting
Mounts to damper shaft using single set screw and to duct with single mounting screw
Dimensions (height x width x depth)
165 mm x 125 mm x 73 mm (6.5 in. x 4.92 in. x 2.9 in.)
Center of output hub to center of captive spacer: 135 mm (5-5/16 in.)
Weight
0.66 kg (1.46 lb)
United States:
UL Listed, File E107041, CCN PAZX, UL 916, Energy Management Equipment.
FCC Compliant to CFR47, Part 15, Subpart B, Class A.
Compliance
Canada:
UL Listed, File E107041, CCN PAZX7, CAN/CSA C22.2 No. 205, Signal Equipment.
Industry Canada Compliant, ICES-003
Europe:
CE Mark – Johnson Controls declares that this product is in compliance with the essential
requirements and other relevant provisions of the EMC Directive.
Australia and New Zealand:
RCM Mark, Australia/NZ Emissions Compliant.
BACnet International
BACnet Testing Laboratories (BTL) Protocol Revision 18 Listed BACnet Application Specific
Controller (B-ASC)
The performance specifications are nominal and conform to acceptable industry standard. For application at conditions beyond
these specifications, consult the local Johnson Controls office. Johnson Controls shall not be liable for damages resulting from
misapplication or misuse of its products.
Repair information
If the controller fails to operate within its specifications, replace the unit. For a replacement unit, contact the nearest
Johnson Controls representative.
North American emissions compliance
United States
This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when this
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area may cause harmful interference, in which case the
users will be required to correct the interference at their own expense.
Warning (Part 15.21)
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority
to operate the equipment.
Canada
This Class (A) digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la Classe (A) respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
Industry Canada Statement(s)
VAV1717 and VAV1732 VAV Controllers Installation Guide
23