Mounting
Mount the keypad near designated points of entry and exit. Once a dry and secure location is selected, do the fol-
lowing:
1. If there is an SD card in the keypad, remove the SD card before opening the touchscreen. See Figure 1.
Warning:
Do not disassemble the touchscreen without removing the SD card first.
2. Remove screw at the bottom of the keypad.
3. Insert screwdriver into slots and pry up to remove.
Figure 1 - Removing the Backplate
4. Secure keypad backplate to the wall using mounting holes, see Figure 2. Use all 4 screws provided unless mount-
ing on a single gang box. Use the plastic anchors if the unit is to be mounted on drywall. If using the keypad
tamper, secure the tamper plate to the wall with a screw.
- 6 -
