04 Alarm tone (4 second duration)
[991] Reset Keypad Programming to Factory Defaults
1. Press [*][8][Installer Code].
2. Enter [991].
3. Use the [<][>] keys to scroll to the applicable keypad.
4. Press [*] to select the keypad.
5. Re-enter [Installer Code].
6. Press [*] to reset the selected keypad to factory defaults.
Approvals
FCC Compliance Statement
Caution:
Changes or modifications not expressly approved by DSC could void your authority to use this equipment.
This equipment generates and uses radio frequency energy and if not installed and used properly, in strict accord-
ance with the manufacturer’s instructions, may cause interference to radio and television reception. It has been type
tested and found to comply with the limits for Class B device in accordance with the specifications in Subpart “B” of
Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference in any res-
idential installation. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause interference to television or radio reception, which can be determined by turning the equip-
ment off and on, the user is encouraged to try to correct the interference by one or more of the following meas-
ures:
l
Re-orient the receiving antenna
l
Relocate the alarm control with respect to the receiver
l
Move the alarm control away from the receiver
l
Connect the alarm control into a different outlet so that alarm control and receiver are on different circuits.
If necessary, the user should consult the dealer or an experienced radio/television technician for additional sug-
gestions. The user may find the following booklet prepared by the FCC helpful: “How to Identify and Resolve Radi-
o/Television Interference Problems”. This booklet is available from the U.S. Government Printing Office, Washington,
D.C. 20402, Stock # 004-000-00345-4.
Industry Canada Compliance Statement
CAN ICES-3(b)/NMB-3(b)
Simplified Declaration of Conformity
Hereby, Tyco Safety Products Canada Ltd. delares that the radio equipment type in compliance with Directive
2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
HS2TCHPRO(BLK): http://dsc.com/1903007
EN50131-1 Grade 3/Class II
The Model HS2TCHPRO/HS2TCHPROBLK Keypad has been certified by Telefication according to EN50131-1:2006 +
A1:2009 + A2:2017, EN50131-3:2009 for Grade 3, Class II.
- 14 -
