Tyco Security Products
6600 Congress Avenue • Boca Raton, FL 33487 USA
5
Tele: 561 912 6000 • Fax: 561 912 6097 •
JOHNSON CONTROLS, TYCO and ILLUSTRA are trademarks and/or registered trademarks.
Unauthorized use is strictly prohibited
© 2020 Johnson Controls. All rights reserved.
Please note: Encryption will remain disabled by default after upgrading from firmware pre -
Illustra.S004.01.09.01.0042
until the user manually enables it, or resets the camera, after which it is
enabled by default.
To enable Encryption:
a)
Log in to camera Web GUI and select
SD Card Management
from the
Edge Recording
menu
.
b)
Select ‘Encrypt entire contents of SD card.’
Please note:
Changing the encryption option requires the SD card to be formatted, all previously
recorded data will be lost.
c)
User now has the option to encrypt SD card with Custom Password.
Please Note: The Custom Password is only required when the SD card is accessed independently from the
camera. It will not affect SD card functionality while it is being used by the camera.
d)
Log in to camera Web Gui and select
SD Card Management
from the
Edge Recording
menu
.
e)
Select ‘Encrypt SD card with Custom Password’
f)
Enter Custom Password into both password fields.
g)
Once the Custom Password has been set, it can be edited or cleared at any time in the
SD Card
Management
tab under the
Edge Recording
menu.
