Tyco Security Products
6600 Congress Avenue • Boca Raton, FL 33487 USA
4
Tele: 561 912 6000 • Fax: 561 912 6097 •
JOHNSON CONTROLS, TYCO and ILLUSTRA are trademarks and/or registered trademarks.
Unauthorized use is strictly prohibited
© 2020 Johnson Controls. All rights reserved.
Once the Custom Password has been set, it can be edited or cleared at any time in the
SD Card
Management
tab under the
Edge Recording
menu.
Please note: The Custom Password will remain set after a firmware upgrade. The Custom
Password will be cleared after a reset.
The
SD Card Encryption can be disabled at any time by unticking ‘Encrypt entire contents of SD
card’. However any changes to the encryption status requires the SD card to be formatted.
Upgrading camera from firmware pre- Illustra.S004.01.09.01.0042
1.
Select
Setup
on the Web User Interface banner to display the setup menus.
2.
Select
Maintenance
from the
System.
3.
Click on the
Browse
button and navigate to the latest firmware.
4.
Select the file and select
Open
.
5.
Select
Upload.
Wait for Firmware Upgrade process to complete.
6.
Log in to camera Web GUI and select
SD Card Management
from the
Edge Recording
menu
.
If SD card was inserted pre-upgrade, or is inserted after the camera firmware has been upgraded,
SD card will show as mounted and encryption options will be disabled until the camera has been
reset.
