1083163-UIM-J-0918
Johnson Controls Unitary Products
41
Natural Gas
LP Gas (Requires LP conversion kit)
LP Conversion Kit Installed By
Supply static
after
evaporator coil (in w.c.")
Return Static (in w.c.")
before
filter
Total External Static Pressure
Installation debris disposed of and furnace area cleaned up?
Explain operation of system to equipment owner
Explain the importance of regular filter replacement and equipment maintenance
Gas Side
Air Side: System External Static Pressure
Owner Education
Additional Job Detail
Supply static
before
evaporator coil (in w.c.")
Calculated input in btuh - clock the gas meter (Nat Gas Only)
Manifold Gas Pressure (in. w.c.")
Inlet Gas Pressure (in. w.c.")
LP Gas Conversion Kit Part # Used
Burner flame inspected -- flames are blue and extending directly into the primary heat exchanger cells
Return Static (in w.c.")
after
filter (furnace side)
Air Side: Heating
Air Side: Cooling
Air Side: Continuous Fan
Clean Up
Give owner the owner's manual provided
Gas Type
Explain thermostat use and programming (if applicable) to owner
Cycle Test
Operate the furnace through several heating cycles from the thermostat, noting and correcting any problems
Operate the furnace through continuous fan cycles from the thermostat, noting and correcting any problems
Operate the furnace through cooling cycles (as applicable), noting and correcting any problems
Low Heat Blower Speed Selected
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
High Heat Blower Speed Selected
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5)
1 2 3 4 5
Temperature rise in degrees F
Low Cool Blower Speed Selected
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
High Cool Blower Speed Selected
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
Cooling CFM delivery (use Blower Performance Data Chart)
Hi
Low
Blower Speed Selected
Lo Heat
HI Heat
Lo Cool
Hi Cool
