background image

System 350 A350A/B Electronic Temperature Control Product/Technical Bulletin

    5

Sensor Connection

Shielded cable is not generally required for sensor
wiring on runs of less than 50 ft (15.2 m), but is
recommended for lengths greater than 50 ft (15.2 m).
When using shielded cable, isolate and tape the shield
at the sensor. Connect the shield to the COM sensor
terminal on the A350A/B. (See Figure 2 for terminal
location.) The A99BA-200C sensor, which includes
shielded cable, is available if needed.

Note:

At the maximum cable lengths listed in Table 2,
no more than 1F° (0.6C°) error in the sensed
temperature will result due to wire resistance.

Table 2: Recommended Maximum Sensor
Cable Lengths

Wire

Shielded Cable Length

*

Gauge

Feet

Meters

14 AWG

800

244

16 AWG

500

152

18 AWG

310

94

20 AWG

200

61

22 AWG

124

38

* Values provided are for 2-wire stranded cable.

Various A99B Series Temperature Sensors and
mounting hardware are available for use with A350
Series Controls. See Tables 3 and 6. The sensor
must be connected to the COM and SEN terminals
on the four-position terminal strip located at the top
left of the printed circuit board (Refer to Figures 2,
4, and 5.). The sensors are not polarity sensitive.

  The sensor must be mounted so that it can

accurately sense the temperature of the controlled
medium.

Table 3: Sensors Included With A350A/B
Controls

Control

Sensor Included

Sensor lead length is 9-3/4 in. (0.25 m)

A350AA-1C

A99BB-25C; Range: -40 to 212°F
(-40 to 100°C)

A350AA-2C

A99BC-25C; Range: -40 to 248°F
(-40 to 120°C)

A350AA-3C

A99BB-25C; Range: -40 to 212°F
(-40 to 100°C)

A350AB-1C

No Sensor Included

A350AB-2C

No Sensor Included

A350AB-5C

No Sensor Included

A350BA-1C

A99BB-25C; Range: -40 to 212°F
(-40 to 100°C)

A350BA-2C

A99BC-25; Range: -40 to 248°F
(-40 to 120°C)

A350BB-1C

No Sensor Included

For more information regarding sensor options and
installation, refer to the

 A99B Series Temperature

Sensors Product/Technical Bulletin (LIT-125186).

A350A/B

S350A

S350A

D350

S350A

Load

Load

Load

Load

Y350R

120 VAC

Shield (Connect
to COM on A350)

Sensor

Figure 5: System 350 Powered by Y350R Module

Summary of Contents for System 350 A350A









Reviews: