Johnson Controls SABROE HeatPAC, Operating Manual

Page: 8 / 64

Operating manual - HeatPAC with reciprocating compressor
8/62
009332 en 2021.07
Introduction
1. Introduction
This manual describes operating conditions for the unit, including:
• Dangers resulting from failure to comply with safety precautions when operating the equipment
and performing maintenance tasks.
• How to start, operate and stop the equipment safely.
• How to act when problems occur during operation.
• Scheduled maintenance tasks for the equipment and when/how to carry them out safely.
This manual is primarily intended for operators and engineers.
To prevent accidents, assembly and disassembly of components should be carried out by competent
personnel only.
• It is important that the operating personnel familiarise themselves with the contents of this man-
ual in order to ensure a proper and efficient operation. Johnson Controls Denmark is not liable
for damage occurring during the warranty period where this is attributable to incorrect operation.
• All compressor intervention within the warranty period must be performed by competent person-
nel only. If not, the warranty no longer applies.
1.1 Amendments to the manual
2021.07 Version 6
• Copy of declaration of conformity removed from the manual. It is now only contained in the
printed manual delivered with the unit and the pdf version uploaded with the order specific
documentation.
• Various minor changes and new coverpage design.
2019.04 Version 5
• Updated designs/drawings of receivers, high-pressure regulation, by-pass function during
start-up and WHC circulation system.
• Set-up guide for AKS 4100 - 280 mm level sensor included.
• Various corrections/changes.
2018.12 Version 4
• Updated version of declaration of conformity for unit.
2017.12 Version 3
• Name plates with EurAsian Conformity mark (EAC) have been added.
• ‘Requirements for competent persons’ section has been added.
• Updated version of declaration of conformity for unit.
• And more.