DVN 5000 Rackmount Series Server
Quick Installation Guide
24-10129-4 Rev. E
15
This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2009 Johnson Controls, Inc.
Audio Specifications
The following table provides audio specification information on the DVN 5000.
Microphone Wiring
Each audio input connector on the DVN 5000 is set up as a stereo audio input jack
for a standard 3.5 mm TRS-type (Tip-Ring-Sleeve) connector.
The
Tip
of the plug is the Left Input for the audio channel.
The
Ring
of the plug is the Right Input for the audio stereo channel.
The
Sleeve
(or Barrel) is ground.
If using a standard dynamic microphone, the
Tip
is positive and the
Sleeve
is
ground. There would be no
Ring
on the plug.
You may use a condenser microphone, but power must be supplied externally (the
DVN 5000 does not supply power to a condenser microphone).
Enable a microphone in the DVN software as the left channel for each audio input.
Refer to the
DVN 5000 Series Software Installation and Configuration Manual
for
assistance.
Item
Specification
Audio Input
Full Input Scale Voltage Range:
4 Vpp
Input Impedance:
100 KOhm
Microphone (Typical)
Type:
Dynamic
Frequency Response:
80-15,000 Hz
Output Impedance:
400-600 Ohms
Effective Output Level:
-52dB (0dB = 1V/Pa)
Analog Output
Full Scale Output Voltage:
3.5 Vpp (1 Vpp Typical)
Max AC Load Resistance:
RL= 3 KOhm
Max Load Capacitance:
CL = 100 pF
TIP
RING
SLEEVE
