Specifications
GENERAL
Maximum detection range
: 100 m/350 ft.
Detection method
: Quad infrared beam interruption detection
Selectable beam frequency
: 4 channels
Interruption time
: Variable between 50, 100, 250, and 500 ms
Power source
: Recommend: 3.6 V, 13.0 Ah LSH20 lithium batteries manufactured by SAFT.
Current draw
:
745 μA
Transmitter: 420 μA + Receiver: 325 μA (at 25°C, 3.6 VDC)
*
Battery life
: Transmitter: Approximately 4 years. Receiver: Approximately 5 years**
Operating temperature
: -20°C - +60°C (-4°F - 140°F)
Operating humidity
: 95 % (max.)
Alignment angle
: ±90° Horizontal, ±10° Vertical
Dimension
:
H х W х D mm (inch): 452 (17.9) x 83 (3.3) x 138 (5.4)
Weight
: 3300 g, includes total weight of Trans Receiver, excluding accessories
International protection
: IP65
Supervisory transmission frequency
: 912-919 MHz, 128/256 second intervals
INDICATOR
Alarm indicator
(Receiver)
: Alarm: ON Light receiving: OFF
Level indicator (Receiver)
: No beam received: ON. Beam receiving: Blinking or OFF
Power indicator (Transmitter)
: Power ON: ON Power OFF: OFF
Low battery indicator
: Voltage reduction: Blinking
Specifications and design are subject to change without prior notice.
* The value is based on the condition that it is used within the ambient temperature range of 20 to 25°C. (LSH-20 x2
pcs)
** The battery life specification applies only when using recommended batteries. See
Ordering Detector batteries
.
Using other battery types may affect battery life expectancy or product performance.
Note
: These devices are designed to detect an intruder and activate an alarm control panel; they are part of a
complete system, therefore the manufacturer cannot accept responsibility for any damages or other consequences
resulting from an intrusion.
