Installation Guide
FCU Controller
14
INPUT LABELING
The inputs are labeled
I1-I6
and are located on terminal block
J2
. The
jumpers for the inputs are labeled
J4-J9
. The following table lists the input
number with its corresponding jumper block number:
Jumper Block #
Input #
JP4
I6
JP5
I5
JP6
I4
JP7
I3
JP8
I2
JP9
I1
Jumper Block #
Input #
JP4
I6
JP5
I5
JP6
I4
JP7
I3
JP8
I2
JP9
I1
Table 1. Inputs and Corresponding Jumper Block Numbers.
INPUT JUMPER BLOCKS
The inputs are jumper selectable for thermistors or dry contacts, and the
jumper setting is the same for both. Figure 7 is an example of one of the
jumper blocks for the inputs.
JP4
Figure 7. Jumper Block for Input Selection.