M9102-AGA-2S and M9104-xGA-2S Series Electric Non-Spring Return Actuators Installation Instructions
2
Accessories
Mounting
To mount the actuator to a damper:
1.
Check that the damper blade is visually accessible,
or its position is permanently marked on the end of
the damper shaft, as illustrated in Figure 2.
2.
Grasp the damper shaft firmly with pliers and rotate
the damper fully closed, as illustrated in Figure 3.
Figure 1: M9102 and M9104 Series Electric Non-Spring Return Actuator Dimensions, in. (mm)
F
IG
:a
ct
_
d
im
3/16
(5)
9/16
(14)
1-13/32
(36)
1-3/32
(28)
2-13/16
(71)
4-3/32
(104)
5-5/32
(131)
2-1/4
(57)
2-1/16
(52)
1-1/4
(32)
25/32
(20)
Set Screw
Radius
Clearance
Table 1: Accessories (Order Separately)
Code Number
Description
DMPR-KC003
7 in. (178 mm) Blade Pin Extension
without Bracket for Johnson Controls®
Direct-Mount Damper Applications
DMPR-KR003
Sleeve Pin Kit for Johnson Controls
Round Dampers with a 5/16 in. (8 mm)
Diameter Shaft
M9000-200
Commissioning Tool that Provides a
Control Signal to Drive 24 V On/Off,
Floating, Proportional, and/or Resistive
Electric Actuators
M9104-100
Connector for 3/8 in. (10 mm) flexible
metal conduit
F
IG
:d
m
p
_
p
o
s
Figure 2: Damper Position Icons
Damper
Shaft
CCW to
Close
CW to
Close
Damper
Blade
Damper
F
IG
:d
m
p
_
ro
ta
t
Figure 3: Damper Rotation