User Manual: TFL2
5
Rev.0.3
2. CONNECTION AND COMMISIONING
Connect the end of line speaker cables to the end of line device using the inputs. The end of
line device will be installed using the 400R configuration.
Check that the in-line connected impedance is within the specified range using the ONE or NEO
series devices. If necessary, change the switch position to modify the impedance value to 200R.
This may occur in very long or low power lines (<10W).
Figure 2 - End of Line Device Connections
NOTE: Do not connect the end of line device to the secondary side (output) of a volume
controller. This may result in the end of line device failing to work properly.
