Johnson Controls IFC-3030, Programming Manual

Page: 32 / 156

32 IFC-3030 Programming Manual — P/N 52025:C 08/05/2005
Program Panel Program Menu (2)
SOFT KEYS
WEEKLY OCCUPANCY SCHEDULE:
Press this soft key to toggle between schedules 1 - 10. A
value of zero indicates no schedule.
ACCEPT:
Press this to save changes made on the screen.
3.3.3 Remote Display Menu
This screen displays when the
REMOTE DISPLAY MENU
soft key is pressed at the Panel
Programming Menu 2 screen.
NOTE: To change the language of the remote display, or to program the panel banner to appear
in the remote display, refer to“LCD-160 Download Menu” on page 81.
Figure 3.16 Remote Display Menu Screen
Soft Keys
INSTALL REMOTE DISPLAY:
To install a remote display, press the arrow keys to place the
cursor on the line next to the remote display address to be installed. Press this soft key until YES
displays. Default:No
POINT PROGRAMMING:
Once a display has been installed, press this soft key to program the
display point.
R E M O T E D I S P L A Y M E N U
D 0 1 : Y E S D 0 2 : N O D 0 3 : N O D 0 4 : N O
D 0 5 : N O D 0 6 : N O D 0 7 : N O D 0 8 : N O
D 0 9 : N O D 1 0 : N O D 1 1 : N O D 1 2 : N O
D 1 3 : N O D 1 4 : N O D 1 5 : N O D 1 6 : N O
D 1 7 : N O D 1 8 : N O D 1 9 : N O D 2 0 : N O
D 2 1 : N O D 2 2 : N O D 2 3 : N O D 2 4 : N O
D 2 5 : N O D 2 6 : N O D 2 7 : N O D 2 8 : N O
D 2 9 : N O D 3 0 : N O D 3 1 : N O D 3 2 : N O
I N S T A L L R E M O T E D I S P L A Y
P O I N T P R O G R A M M I N G B A C K