30
P00860Q-rev.2
(6) Refrigerant Cycle No. Setting (RSW2 & DSW5)
This setting is required. The unit arrives with all
VHWWLQJVLQWKH2))SRVLWLRQ
)XVH5HFRYHU'6:
)DFWRU\6HWWLQJ
* In the case of applying high voltage to the terminal 1 and 2 of TB2,
WKH$IXVHRQWKH3&%LVFXW,QVXFKDFDVH¿UVWUHFRQQHFWWKH
wirings correctly to TB2, and then set the No.1 pin to ON.
1
2
ON
OFF
1
2
ON
OFF
3
4
1
0
8
9
2
56
7
3
4
1
0
8
9
2
56
7
1 2 3 4 5 6
ON
OFF
1 2 3 4 5 6
ON
OFF
DSW5 (Tens Digit)
Refrigerant Cycle No. Setting
RSW2 (Units Digit)
Setting
Position
Set by inserting
slotted screwdriver
into the groove.
Ex.) Set at No.5 Cycle
DSW5
RSW2
Set All Pins OFF
Set at "5"
Before shipment, DSW5 and RSW2 are set at "0".
For the units supporting H-LINK II,
the ref. cycle No. can be set for Max. 64 cycles.
(No. 0~63)
7XUQ2))DOOSRZHUVXSSO\RIWKHLQGRRUXQLWVDQGWKHRXWGRRUXQLWVEHIRUH',3VZLWFKVHWWLQJV
Otherwise, the setting will be invalidated and not take effect.
NOTES:
Ɣ 7KH³Ŷ´PDUNLQGLFDWHVVHWWLQJIRU',3VZLWFKHV)LJXUHVVKRZVHWWLQJEHIRUHVKLSPHQW
Ɣ :KHQWKHXQLWQXPEHUDQGWKHUHIULJHUDQWF\FOHDUHVHWUHFRUGWKHXQLWQXPEHUDQGUHIULJHUDQWF\FOHWR
facilitate service and maintenance thereafter.
NOTICE
)XQFWLRQ6HOHFWLRQE\:LUHG&RQWUROOHU
Each function can be selected with the wired controller. Refer to the “Installation and Maintenance Manual”
for the wired controller and the “Engineering Manual” for details.
< Selecting Thermistor for Detecting Indoor Temperature >
Refer to Section 5.8 “Setting of Wired Controller and Remote Sensor”.
< Constant Air Volume Mode >
7KHDLUÀRZYROXPHFDQEH¿[HGZLWKWKHLWHPFRGHRIIXQFWLRQVHOHFWLRQVHW³E´E\RSWLRQDOZLUHG
controller, even when defrosting operation or hot start is performed. This function can help keep the
EDODQFHRIDVXSSO\H[KDXVWDLUYROXPH7KHUHIRUHLIDYHQWLODWLQJIDQLVLQVWDOOHGLWLVXVHIXO
Item Code
2SWLRQDO)XQFWLRQ
Setting Condition
b2
Constant Air Volume Mode
01
NOTE:
%HFDXVHWKLVPRGHLVIRUFRQVWDQWDLUÀRZYROXPHDFROGGUDIWPD\GLVFKDUJHHVSHFLDOO\LQDVHDVRQZKHQ
the Heating Operation is often used (defrosting operation and hot start is performed).
%HFDUHIXORIDLUÀRZGLUHFWLRQZKHQVHOHFWLQJWKHLQVWDOODWLRQORFDWLRQ&RQVXOWZLWK\RXUFXVWRPHU
(8) Control Mode Setting (DSW8)
,IWKHFRQWUROPRGHW\SHLV2XWOHW$LU7HPSHUDWXUH&RQWUROWKLVVHWWLQJLVUHTXLUHGGHSHQGLQJRQWKH
setting method of control mode.
5HIHUWR6HFWLRQ6HWWLQJRI&RQWURO0RGH
