Johnson Controls (H,Y,C)IDM030B21E, Engineering Manual

Page: 36 / 50

3-4
TC-16004-rev.2
OPTIONAL PART
3.3.4 Accessories / Options
No. Accessory Qty Remarks
1
IR Receiver Kit
CWDIRK01
1 With Connecting Cable
2 Cable Band 1 For Clamping Cable
3 Securing Screw 4 For Installing IR Receiver Kit
4 Securing Screw 2 For Fixing Cable Clamp
5 Cable Clamp 2 For Clamping Cable
3.3.5 Installation
● Turn OFF the power supply completely before setting the DIP switch, installation work, and electrical
wiring work for the IR receiver kit. If not, it may cause an electric shock.
● Perform securely the installation work referring to this manual. If the installation is not completed
correctly, the IR receiver kit may fall and cause injury.
● Do not install the IR receiver kit where flammable gases may generate or enter. It may cause heat
generation or a fire.
● Correctly perform the electrical wiring work. If electrical work is not completed correctly, heat generation
at the connection, a fire or an electric shock may occur.
● Make sure that the electrical wires are securely fixed so that no external force affects the terminal
connections of the wiring. Not doing so may cause heat generation or a fire.
● When the IR receiver kit is installed near ambient lighting, it may not receive a signal from the wireless
controller. Therefore, pay particular attention to the installation position of the IR receiver kit.
● Do not run the connecting cable for the IR receiver kit and the power supply cable (208/230V) in
parallel. It may cause a malfunction of the IR receiver kit.
● To ensure correct performance, read this manual together with the “Installation and Maintenance
Manual” for the indoor unit and the wireless controller. Forward this information to the building owner
and request that they maintain all the equipment manuals.
● CWDIRK01 is for a general-purpose IR receiver kit. It is applied for ducted, cassette, wall mount,
ceiling-suspended, and floor type indoor units.