8 EDA-8000 Product/Technical Bulletin
S
pecifications
Product
EDA-8000 Electric Damper Actuator Incremental Control without Spring Return
Power Requirements
24 VAC (20 to 30 VAC) at 50/60 Hz, 500 mA (maximum), 12 VA (maximum)
Electrical Connections
Screw Terminals
Mechanical Output
Stall Torque: 100 in·lb
Maximum Damper Area
16 sq ft based on a closing torque of 4.8 in·lbs/sq ft at 1.25 in. WG closed static pressure and
1000 fpm fully open approach velocity
90 Degree Rotation Time
60 seconds at 60 Hz
Drive Shaft
10 mm (0.394 in.) to 12 mm (0.472 in.) square and 7/16 in. (11 mm) to 1/2 in. (12.5 mm) round
Ambient Operating
Conditions
-20° to 150°F (-29° to 65°C) 90% RH maximum, non-condensing
Ambient Storage
Conditions
-20° to 150°F (-29° to 65°C) 90% RH maximum, non-condensing
Dimensions (H x W x D)
9.25 in. x 4.5 in. x 4.375 in. (235 mm x 114 mm x 111 mm)
Shipping Weight
8.5 lbs (3.86 kg)
Agency Compliance
UL 916, CSA
Agency Listings
UL Listed as part of the Metasys Network
Accessories
(Order Separately)
3/4 inch coupler kit--Product Code Number 8000-100
Drive pin extension for JCI D-1300 Dampers--D-9999-142
Universal mounting bracket for ducts less than 16 gauge--D-3153-105
Adjustable Mounting Bracket--EDA-8000-101
The performance specifications are nominal and conform to acceptable industry standards. For application at conditions beyond these specifications,
consult the local Johnson Controls office. Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products.
Controls Group
507 E. Michigan Street
P.O. Box 423
Milwaukee, WI 53201
Printed in U.S.A.