Wired Controller DWUNI User Manual
3.6
SWING
(Louver
)
Setting
When unit is in ON
status, press
SWING
button for
louver
setting. Two
louver
modes are available: fixed-angle
louver
and simple
louver
.
. Up&down
When fixed-angle louver mode is set, louver operation is a follows:
When unit is in ON
status, press
SWING
button to select
up&down louver.
louver
angle
is
adjusted as below:
ĺ
ĺ
ĺ
ĺ
ĺ
ĺ
closed
ĺ
Select up&down and left&right
louver by the
“
˘
” or “
”
button.
Select
left&right
louver
to adjust the
louver
angle as
follows:
ĺ
ĺ
ĺ
ĺ
ĺ
ĺ
closed
ĺ
Note:
ķ
.
Turn on fixed-angle
louver
mode in f
function
setting page;
ĸ
.
If fixed-angle
louver
is not available for the model, fixed-angle
louver
is
invalid when the wired controller turns on fixed-angle
louver
mode.
Simple
louver
mode: when fixed-angle
louver
mode is turned off,
louver
operation
is as below:
Pressing
SWING
button under unit on status, up&down
louver
frame occurs.
P
ress
SWING
button to turn on
or off
up&down
louver
. is displayed when
up&down
louver
is on and is not displayed when up&down
louver
is off.
If
up&down
louver
frame
does
not disappear, press
“
” or “
”
button to switch to
left&right
louver
setting
.
L
eft&right
louver
frame occurs.
P
ress
SWING
button to turn
on or
off
left&right
louver
. is displayed when left&right
louver
is on and is not
displayed when left&right
louver
is off. For detailed operation, please refer to Fig. 7.